For commercial buildings, we recommend evaluating our ultra-efficient e-Rated® transformers. Also, because these facilities often support a high percentage of electronic loads (computers, phones, LED lighting, etc), we recommend evaluating our Distribution TransFilters™ to reduce flat-topping of the voltage waveform at the loads’ switch-mode power supplies and improve overall system efficiency.
For industrial facilities, harmonics from nonlinear loads, such as motors drives, electronic lighting ballasts, and rectifiers are a primary cause of equipment failures and energy losses. Harmonic mitigation is especially crucial for operations involving motors since harmonic currents lead to decreased motor efficiency, increased heating, and reduced motor life. We will work with you to develop a system-wide approach that may include proper application of our Distribution TransFilters™, to deliver high power quality with outcomes including:
PQI Product |
Description | Benefits within Commercial & Industrial Facilities |
EY (e-Rated®) | Ultra-efficient transformer |
- Low first cost |
DY & DV Distribution TransFiltersTM |
Harmonic mitigating transformers: |
- Reduces power costs - Reduces penalty losses due to harmonic currents - Reduces transformer heating and A/C loading - Reduces THDv to less than 5% at nonlinear loads or motor drives - Reduces losses in the loads, thereby reducing A/C requirements - Improves switch-mode power supply's 'ride-through' capability - Balances primary phase currents - Assures system compatibility with sensitive electronic loads - Capable of developing 12-, 18-, 24-, and 36-pulse primary systems (with Type DV) |
PQI Product |
Typical Application | Additional Benefits within Commercial & Industrial Facilities |
DD | Motor drive loads |
- Provide isolation from upstream transients |
MY | 240V motor loads |
- Resolves failure problems that result when 230V and 240V motors are supplied by conventional 208V sources |
Z Filter (I0 Filter & Mini-Z) |
High K-Factor loads (l0 Filter) |
- Reduces neutral-to-ground voltages to <4V at nonlinear loads (<1V for Mini-Z) - Increases general purpose (K-1) transformer capacity by up to 54% - Protects upstream neutral conductor - Increases feeder and bus capacity - Balances feeder and bus phase currents (& branch circuit for Mini-Z) - Able to conveniently connect to pre-wired office paritions (Mini-Z) |